The IC-V3500 contains powerful communications with its compact body and simple interface. This radio's large heatsink helps ensure stable output during continuous transmissions. This radio is a must for those looking for a long-range mobile with a fresh look.
Output Power: | 65W / 25W / 10W / 5W | |
RX Frequencies: | 144-148 MHz | |
Memory Channels: | 207 (200 alphanumeric memories, 1 call channel, 3 pairs of scan edge memories) |
Modern Looks on a Simple Design
The IC-V3500 has a sleek and easy-to-read white LCD screen. Radio function labels along the bottom of the screen create easy-to-read identifiers for the front panel buttons in low light and nighttime operation.
Loud Audio
Off-road tires, roof racks, and engines can contribute to a vehicle’s cabin noise. Cut through the noise with the built-in 4.5W speaker for loud and clear audio. Both the frequency response and opening slit have been improved from similar models. Additionally, set up presets to raise, lower, or mute the radio for those who like precise audio levels.
Safety Function
Use the emergency call function to send beeps and hot microphone audio to others. While the emergency call function is active, the speaker will amplify messages to notify others within earshot.
Other Features
- Built-in CTCSS and DTCS encoder/decoder for repeater access
- Dynamic bank link scan function to scan all memory channels in selected banks
- Up to 16 DTMF autodial memory channels
- Priority watch function
- Wide/narrow channel setting
- Power supply voltage display
- Program most functions through the remote microphone
icom V3500
General Frequency coverage (MHz)
Tx
Rx
144-148 MHz
136-174 MHzNumber of channels 207 channels (including 1 call and 6 scan edges) Type of emission F2D, F3E (FM) Frequency stability ±3 ppm Power supply requirement 13.V DC ±15% Current drain
Tx 65W
Rx Max. Audio/Stand-by
11A
1.5A / 0.4AAntenna impedance 50Ω (SO-239) Operating temperature range -10°C to +60°C; 14°F to +140°F Dimensions (W x H x D;
projections not included)140 × 40 × 118 mm;
5.5" (W) x 1.6" (H) x 4.6" (D) inchesWeight 1.1 kg, 2.4 lbs Transmitter Output power (13.8V DC) 65W, 25W, 10W, 5W Max. frequency deviation ±5.0 kHz / ±2.5 kHz (W/N) Spurious emissions Less than –60 dBc Microphone impedance 600Ω (8-pin modular) Receiver Sensitivity Less than 0.18 µV (at 12 dB SINAD) Selectivity
Wide
Narrow
More than 6 kHz (at 6 dB)
Less than 14 kHz (at 60 dB)
More than 3 kHz (at 6 dB)
Less than 9 kHz (at 55 dB)Spurious response More than 60 dB Audio output power 4.5W typ (10% dist., 4Ω load) Ext. speaker connector 2-conductor 3.5 (d) mm (1/8") / 4Ω All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications
Standard MIL 810 G Method Proc Low Pressure 500.5 I, II High Temp. 501.5 I, II Low Temp. 502.5 I, II Temp. Shock 503.5 I-C Solar Radiation 505.5 I Vibration 514.6 I Shock 516.6 I, IV Supplied Accessories
- DC power cable
- Microphone hanger
- Mounting bracket kit
- Remote control Microphone, HM-133V
- Spare fuse